Power Wcb-75 Mini-Gear Oil Pump 20 1.5″

 

Energy WCB Mini-Equipment Oil Pump

All Metal Equipment Pump
This pump was CZPTly made for pumping diesel fuel. It might be used for pumping oily liquids these kinds of as diesel, biodiesel, kerosene, and warm vegetable oil or chilly vegetable oil if began up appropriately (see underneath). This pump operates exceptional for biodiesel processor apps.
This pump can handle viscous fluids this kind of as vegetable oil. When the oil is sizzling, the pump handles it with out any problems. If the oil is chilly, normally much less than 70°, the pump may possibly want a small leap commence to get it working up to entire velocity. In order to do this, set up a ball valve somewhere on the suction facet of the pump. Shut the ball valve and switch on the pump. Once the pump is up to complete rotation (1 CZPT or much less) the ball valve can be opened and it will pump the oil with no difficulty. This may possibly also be completed by getting rid of the suction line from a tank of oil. Enable the pump to suck air initial to get up to speed, then dump the suction hose into the tank and it will suck the oil by means of very easily. The pump has a high rotation rate, so if the pump starts off with viscous fluid currently in the strains, the pump will battle to get up to velocity and will use also several amps and overheat. Permitting the pump to get up to full pace prior to introducing thick fluids is recommended. Usually, this pump does not require any sort of help for gas oils these kinds of as diesel gas.
The mini-gear pump is a pump hooked up to the motor by a shaft. The pump itself is all metallic (steel gears) and can pump very hot fluids without having overheating the different motor which is linked by a steel shaft coupling. The motor is higher electrical power and has thermal defense, which will automatically shut off the pump in circumstance temperatures reach ranges which danger overheating of the motor.
The motor is made to most Usa Requirements.
These pumps develop strong suction and are self-priming. They can run dry for intermediate amounts of time, permitting for the use of a suction hose for amassing fluids from a tank. The metal gears which travel the pumping motion can deal with a good deal of fluids, even if partially soiled. In the case of vegetable oil, any gentle particles will go proper by means of the pump with no troubles, and are typically pulverized by the gears themselves. Tough materials, these kinds of as metals, must not be authorized to pass by way of the pump to stop injury.
 
WVO Assortment:
These pumps have substantial suction electricity and are great for gathering vegetable oil (when heat adequate) from tanks. No matter whether basically transferring oil or amassing oil, these pumps provide quickly pumping with no require for priming the suction hose.
 
Biodiesel:
These pumps are regarded as to be a lot safer for biodiesel creation than the harbor freight clear h2o pumps because the pump is individual from the motor. The positive aspects of the ongoing operation and high circulation rates make this an superb pump for a biodiesel processor. It will pump the waste vegetable oil, biodiesel and even glycerin with out any difficulties.
 
Viscous & Chilly Oils:
This pump can take care of viscous fluids these kinds of as vegetable oil. When the oil is hot, the pump handles it without having any issues. If the oil is chilly, generally significantly less than 70°, the pump may possibly need to have a modest soar commence to get it running up to complete speed. In get to do this, set up a ball valve somewhere on the suction aspect of the pump. Shut the ball valve and switch on the pump. Once the pump is up to entire rotation (1 CZPT or significantly less) the ball valve can be opened and it will pump the oil with no difficulty. This may also be carried out by removing the suction line from a tank of oil. Enable the pump to suck air very first to get up to velocity, then dump the suction hose into the tank and it will suck the oil through simply. The pump has a high rotation price, so if the pump begins with viscous fluid presently in the strains, the pump will wrestle to get up to pace and will use way too several amps and overheat. Allowing the pump to get up to entire velocity prior to introducing thick fluids is advised. Usually, this pump does not need any kind of support for gasoline oils such as diesel gas.
 
Procedure Suggestions:
Even though the pump can run dry for the case of priming, it is ideal not to operate the pump dry repeatedly for a long period of time to avert the risk of harm to the pump from deficiency of lubrication. Fluids need to be retained clear to stay away from clogging of the gears. Coarse strainers (400+ micron) can be employed on the suction conclude to prevent massive particles from coming into the pump. Do not use wonderful filters on the suction facet or the restriction will prevent adequate circulation.
Consumers who pump vegetable oil need to also be informed of that at times when cold oil sits in the pump, the pump can have difficulty acquiring up to speed. If this takes place, the pump must be started with air on the suction line or with a ball valve on the suction line totally shut. When the pump is up to speed (a make a difference of 1 or 2 CZPTs) the ball valve can be opened or fluid released to the pump and it will pump as regular.
Connections:
Our Electrical power WCB Mini-equipment Pumps appear with a flange attachment and a fitting to expand the measurement of the port. We use the flange to avoid strain fall going into the head of the pump. This flange has a fluoroelastomer (like Viton®) gasket for a biodiesel compatible seal. This flange can be replaced with yet another flange of your choice if require be.
CZPT Metal Pump Heads: For pumps with stainless steel heads, we presently do not have flanges obtainable, and the connections are created immediately to the expansion fittings. Some force loss major to the head could occur on these pumps and partially lessen flow of the fluid from technical specs except if a flange is connected.
 
CZPT
This pump can only be utilized for pumping oily liquids. It can’t be utilized for liquids that are non-lubricating or the gears in the pump will lock up and corrode.
 
Piping:

Use a sound pipe or sturdy hose that will not collapse underneath the high vacuum produced from the suction of the pump. The pump will come with fittings, which adapt to the suitable size of piping/tubing needed for sufficient stream. it is greatest not to size down the suction side besides in the circumstance of the WCB75, where it can be sized down to one-1/four” piping for greater suction as opposed to much better movement price.
 

WCB Mini-Gear Pump CZPT Parameters

Model

WCB30

WCB50

WCB75

Movement price

30 L/m (8 gpm)

50 L/m (13 gpm)

seventy five L/m (20 gpm)

Strain

.3 Mpa (43 psi)

.3 Mpa (forty three psi)

.three Mpa (43 psi)

Max Suction Peak

5 meters (sixteen ft)

five meters (16 toes)

With one.5″ Tubing: 4 Meters (twelve.eight Feet)
With 1.twenty five” Tubing: five meters (sixteen ft)

Max Head

thirty Meters

30 Meters

30 Meters

Pump Housing

Solid Iron or CZPT Steel

Dimensions (LxWxH)

15″x6.five”x8″

fifteen”x6.5″x8″

sixteen”x6.5″x8″

Enter Voltage

110v AC / sixty Hz

110v AC / 60 Hz

110v AC / 60 Hz

Pace (rpm)

3480

3480

3480

Max Electricity

.375 KW (1/2 HP)

.550 KW (3/4 HP)

.750 KW (one HP)

Inlet/Outlet Threads

three/4″ NPT

one” NPT

one.five” NPT

Bodyweight

fourteen.27 kg (31.4 lb)

15.22 kg (33.50 lb)

seventeen.ninety five kg (39.fifty lb)