Plastic Recycling Plant Plastic Pet Recycling Plant with 500kg H

Plastic Recycling Plant  Plastic Pet Recycling Plant with 500kg H


CZPT Recycling Plant/ plastic PET recycling plant with 500kg/h. The equipment with High-torque twin-screw extruding screw device, this  is a new-generation high-speed, substantial-torque and higher-power twin screw extruder recognizing technological promotion based mostly on the current item by drawing encounter from the superior manufacturing technological innovation in China.


The advantages of this machine
1. Extremely efficent: the equipment is automatic and with less electricity consumption.
two. Specific screw layout: We will layout the screw up to buyer distinct substance and the materials of screw and barrel can be 38CrMoAL or bimetallic.
three. This equipment can carry out best viscosity of PET without complicated precystallization dryer system. Only a little bit IV will be decreased. It can improve IV in the issue of introducing some appropriate additive.
five. The machine wih extended lifestyle.

other variety of these kinds of machine









CZPT diameter(mm)





sixty two.4

seventy one.two

ninety one

Rotary speed(rpm)





four hundred/five hundred

four hundred/five hundred

four hundred/five hundred

Major motor electrical power(kw)




37/forty five

fifty five/75

ninety/one hundred ten




28-forty eight

32-forty eight


32-forty eight

32-forty eight






20-one hundred fifty

one hundred-300


600-a thousand

Structure of the machine

Far more specifics device photoes
Crystallization dryer: dryer the PET flakes in progress
Vulume: 1000L.
Heater electricity: 36kW
Heat way: by electrical
Blower power : 4kW
Mixer electrical power: 2.2kW
Mixer shaft: SS304
Materials: Inside of stainless metal, outdoors A3, With heat insulation layer.
With the open up doorway on the hopper, it will be simply function.

One screw feeder  For feeding the flakes into the extruder:
Feed the PET flakes into the extruder, solitary screw feeder, feeding the material similarly and stably.
Horizontal screw parameter:
CZPT diameter:φ60
Material of hopper: SS304
There is sight glass on the hopper, worker can be see the material in the hopper
Twin screw extruder device
Barrel variety: 10
Size of barrel #one-ten is 234mm
Whole length of barrels: ~2340mm
Barrel #1-9 made of 38CrMoAl content, Hardened to ≥61HRC
The barrel segment are cooled with water, each and every barrel adopts single throttle and solenoid valve, and solenoid valve imported from Italy.
Barrel#1 open up for feeder, Barrel#four: open up barrel, for normal degassing, Barrel#6, Barrel#68: open up barrel, for vacuum degassing. The other individuals is shut.
The processing segment is provided with stainless metal cover as a defense against.
Diameter :sixty two.four mm L/D: 36:1
Centre distance: 52mm
Substance of screw: W6Mo5Cr4V2
CZPT velocity (counter rotating): 400RPM
A pair of screw shafts, complete with screw factors, screw shafts  material is 40CrNiMo, Hardened to ≥61HRC

The material occur out from the die(pull lure like noodles pelletizing way, PET must use this pelletizing way. And the its want good vacuum, like roots pump, then the pellets will be considerably much better)

CZPT for the screw( drinking water controlled by electric powered valves)

CZPT aspects of the machine

Vacuum, we can use Roots vacuum or Bipolar pump.

Degassing on the extruder

H2o tank
Substance arrive from the die and go into the drinking water tank for cooling, There is rubber roller in the tank, substance strap can be deliver into gale dryer to blower the h2o on its surface.
Duration of tank : 4m,
Materials of tank is SS304, Content of bracket :Q235
It Can be moved up and down, ahead and back up to the die and content needed.
Energy of blower on gale dryer:two.2kW

A. Portal shaped type pelletizer,horniness alloy rotary cutter
B. capacity:300kg/hr
C. motor electrical power:4KW
D. Cutter diameter: 300mm
E. Blade width: 20mm
F. Traction velocity :thirty-90m/min
G. No. of cutter gears: 32
H. Max number of traces: significantly less than 60

Last pellets and Raw material

If you require  more particulars of this sort of machine kindly get in touch with me, I can ship you far more detail photoes and  vedios.

1. We source beneath required paperwork with the equipment:

  1. CZPT structure
  2. CZPTtricity diagram
  3. CZPT certification
  4. CZPT handbook book/maintenance ebook

2. We gives one-12 months good quality guarantee. In the course of this time period, if the machine’s malfunction is accredited to be our duty, we will deliver the broken spare components to you with DHL courier or other way inside 7 workdays right after getting the complainant. And send out the experts to the buyer’s manufacturing facility for keeping. All fees are in our account.

3. Right after one particular 12 months guarantee, If you want we can provides payable spare parts and technician’s Checking out routine maintenance, and any damaged spares we can send you quickly as attainable.

4. We believe in that our quotation meets with your needs and we will gladly furnish you with additional details.

5. 24Hours services :  Cell-139157 0571 eight

Plastic Recycling Plant  Plastic Pet Recycling Plant with 500kg H